Extra options for a stubborn hinge
Use penetrating spray to free a dirty or rusted pin. For longer-lasting quiet, finish with a dedicated hinge lubricant.
- WD-40 Specialist Penetrant
- 3-IN-ONE professional hinge lubricant
That nerve-jangling squeak every time a door opens is one of the easiest fixes in the house — usually a two-minute job. The noise is simply metal rubbing on metal because the hinge has run dry, collected dirt, or started to rust. Here’s how to silence it for good.
Quick Answer
A common longer-lasting approach for a squeaky door hinge is removing the hinge pin, cleaning it, and applying white lithium grease. Tap the pin out from below with a screwdriver and hammer, wipe off old grime, apply a thin coat of grease along the pin shaft, then reseat. Repeat for each hinge on the door. WD-40 silences the squeak temporarily but evaporates within weeks.
Save this for later
Pin this guide to your DIY board so you have it when you need it.
Save to PinterestWhy Hinges Squeak
A hinge pivots on a metal pin running through interlocking knuckles. Over time the lubricant wears away, dust and grime build up around the pin, or moisture causes light rust. Any of these creates friction, and friction makes the squeak.
What You’ll Need
A lubricant is the main thing. You can use a spray penetrating lubricant, household oil, or a longer-lasting option like petroleum jelly or a dry silicone spray. For removing the pin you’ll want a hammer and a nail or a screwdriver, plus a cloth. If there’s rust, have some fine steel wool ready, and a can of silicone or penetrating lubricant covers most situations.
Fix 1: The Quick Lubrication
For a fast fix, apply your lubricant directly to the hinge, aiming for the pin and the barrel where the knuckles meet. Open and close the door several times to work it into the joint, then wipe away any drips. This often stops the squeak immediately, though if the pin is dirty or rusty the noise may come back — in which case do Fix 2.
Fix 2: Remove and Clean the Pin (Longer-Lasting)
For a fix that actually lasts, take the pin out and clean it. Work on one hinge at a time so the door stays hung. Place the tip of a nail or screwdriver under the head of the hinge pin and tap upward with a hammer to drive it out. Wipe the pin clean of old grease and grime with a cloth, coat it in fresh lubricant or a smear of petroleum jelly, and tap it back into place. Repeat for the other hinges. Cleaning off the built-up dirt is what stops the squeak returning.
Fix 3: Deal With a Rusty Pin
If the pin is rusty, remove it as above and rub the rust off with fine steel wool until the metal is smooth and shiny. Coat it in lubricant and reinsert it. If the pin or hinge is badly corroded, it’s cheap and easy to fit a new hinge instead.
Choosing the Right Lubricant
Spray penetrating oils work fast but can drip and attract dust over time, so wipe off the excess. For a cleaner, longer-lasting result, petroleum jelly or a dry PTFE or silicone lubricant stays put and won’t run. In a pinch, rubbing the pin with a bar of soap or a candle works as a quick, grease-free fix.
How Much Does It Cost?
Essentially nothing — most people already own a suitable lubricant, and even a replacement hinge is only a few dollars. The whole job takes a couple of minutes per hinge.
When to Call a Professional
A squeaky hinge almost never needs a professional. The only time to look closer is if the hinge is damaged or the door has dropped and is rubbing the frame, which is a different problem — that’s about alignment, not lubrication.
Frequently Asked Questions
What is the best lubricant for a squeaky door hinge?
A dry silicone or PTFE lubricant lasts longest and won’t attract dust. Spray penetrating oil works quickly, and petroleum jelly is a clean, long-lasting option. Apply it to the pin and barrel of the hinge.
Why do my door hinges squeak?
The hinge has run dry, collected dust and grime around the pin, or started to rust, so the metal parts rub against each other as the door moves. Lubricating or cleaning the pin removes the friction.
How do I stop a door from squeaking without WD-40?
Petroleum jelly, a dry silicone lubricant, a little olive oil, or even rubbing the hinge pin with a bar of soap or candle wax all work. Apply to the pin and work the door back and forth.
Do I need to remove the door to fix a squeaky hinge?
No. You can lubricate the hinge in place, or remove just the hinge pin — one hinge at a time — without taking the door off. The door stays hung throughout.
Why does my hinge still squeak after I oil it?
The pin is probably dirty or rusty, so the oil can’t reach the friction point. Tap the pin out, clean off the grime or rust with a cloth or fine steel wool, lubricate it, and reinsert it.
Squeaky Door: Hinge or Alignment?
A dry hinge is the usual cause, but a sagging door rubbing against the frame can sound similar. Open the door slowly and listen at each hinge. If the noise changes when you lift the handle, tighten the hinge screws and check alignment before adding more lubricant.